Tent of its methods and techniques of time: 2011 -
07 source: tent author: outdoor camping goods
tent < p > there are various types of tents, and at the same time, there are different ways of production, design of collocation and combination.
Small tent tents, tent wall type, an a-line shape due to the order of the structure, the combination, is the use of cable erection of set-up tents '', and the recent development of improved warhead and cabin tent, is belong to the' combination of tents.
< / p > < p > one of the following to basic camping tents, since ancient times is quite popular tent wall type as an example, the description of the tent set-up.
< / p > < p > a, location decision < / p > < p > after considering the direction of the wind and terrain, select a flat land.
< / p > < p > 2, tents appliance check < / p > < p > will bag collection of articles poured out, one by one check all parts.
For the convenience of roll-up tents and not missed something, should be recorded.
< / p > < p > three, laying the ground mat < / p > < p > the ground mat after the shop is good, to secure four corners with a nail.
If the moisture, the mat on the shop before, then on its spread mat.
< / p > < p > 4, pillar erected, pull open the main rope < / p > < p > pillar below will wear pads at the ends of the hole in the ground, at the same time, the tip of the upper pillar, wearing a slot in the curtain building column two column, will be around the main line, to avoid tilt.
In this way, the body of the tent shape is formed.
< / p > < p > five, adjust the main rope, pull Angle line, waist line < / p > < p > with a rope attached to the main rope, adjust the shape of a tent, two pillars vertical in the ground.
Second, with a rope adjusting Angle line, waist line, make the form of tent.
< / p > < p > 6, fixed wall < / p > < p > the tent cloth, the ground mat and the lower part of the wall.
< / p > < p > above the erection sequence for wall type tent, four people division of labor cooperation, in the condition of skilled, about 10 -
15 minutes to complete.
< / p > < p > usually, in order to reduce the influence of wind and rain and sun, cold, will be combined with the roof cover.
In step 4, insert pillar holes at the ends of the building, plus the first roof cover, and then pull the main rope, the rope to nail, by the end of the roof of the building to vertices, formed on both sides of an equilateral triangle, the bottom edge of the long, into a pillar with equal length.
From the roof of the upper part, Angle rope shall extend, the diagonal of the waist line and Angle line side by side in a straight line.
< / p > < p > in the past, tent, make available in four weeks digging ditches.
Now, standing on the ground of protecting natural, unless in ShuiWaDe, otherwise not dig a trench.
< / p >
Nanjing Foerstine International Trading Co.,Ltd. who is highly knowledgeable about manufacturing as well as selling and confident in our ability to create finest products as custom outdoor products custom fitness accessories.
Nanjing Foerstine International Trading Co.,Ltd. is committed to attracting, developing, and keeping a diverse work force that reflects the nature of our global business.
Our company specializes in selling custom outdoor products as well as providing relevant services.
There are multiple advantages of having a custom fitness accessories custom outdoor products from responsible drilling machine exporters such as Nanjing Foerstine International Trading Co.,Ltd., as they adhere to all the quality standards as you can list and supply all custom fitness accessories essential for the operation of the device without any difficulty.